630 - Diastereomer-dependent substrate reduction properties of a dinitrogenase containing 1-fluorohomocitrate in the iron-molybdenum cofactor

The normal nitrogenase central cofactor contains homocitrate near the central metal atom; it is required for formation of the cofactor. This study looks at compounds similar to homocitrate (diastereomers of fluorohomocitrate) incorporated into the cofactor, and how they affect the enzyme's activity.

What They Saw
They purified enzyme from Klebsiella pneumoniae and Azotobacter vinelandii I think; it's hard to tell because this paper (and others they cite) are really badly written with regard to methods. (They seriously put in a footnote saying "The experimental details of the synthesis of 1-fluorohomocitrate may be obtained from [author initials]." How is that acceptable, especially in a PNAS paper?). Somehow they got FeMo-cofactor with different analogs of homocitrate, and tested their activity with different substrates.

With threo-fluorohomocitrate, there was hardly any nitrogen fixation, similar to with citrate, but with erythro-fluorohomocitrate, there was about 3.5x less than with plain homocitrate, so it was somewhat active. Both were about half as good at acetylene reduction (measured by ethylene), and just as good at cyanide reduction (measured by methane).

In terms of hydrogen production, if there was a difference between plain homocitrate and the fluoros, it wasn't very big; they produced almost as much as the normal one. The same was true of other analogs (homoisocitrate, isocitrate, etc), though some were impaired (such as citrate, producing only about half as much).

The addition of inhibitors, carbon monoxide (CO) or carbonyl sulfide (COS), affected these different enzymes differently. The amount of hydrogen from homocitrate increased (maybe significantly) but decreased some or none for analogs, depending on the analog, up to 63%. The inhibitors reduced acetylene reduction from 35-100% in all cases, and cyanide reduction a little or a lot too.

Cyanide itself affected hydrogen production. (Dang, this paper is so badly written, it's giving me a headache trying to figure it out.) With all tested analogs (and homocitrate), cyanide inhibited hydrogen production 85-95%. Adding CO with cyanide prevented this inhibition with homocitrate and partially with fluorohomocitrate, but not much the other analogs. CO also inhibits cyanide reduction, at least with some analogs (especially the more active ones).

What This Means
This study can tell a lot about the biochemistry of different substrates binding to the enzyme and the enzyme acting on them. I wonder if the results are skewed somewhat because they only measured some of the products, not all possible ones (i.e. might some analog-based cofactors produce ethane from acetylene in addition to ethylene?). In terms of application, even if some of these analogs have desirable properties, it seems like it would be difficult to get them incorporated in vivo.

Reference:

Madden, M. S., Kindon, N. D., Ludden, P. W. & Shah, V. K. Diastereomer-dependent substrate reduction properties of a dinitrogenase containing 1-fluorohomocitrate in the iron-molybdenum cofactor. PNAS 87, 6517–6521 (1990).

542 - Purification and Characterization of the vnf-encoded Apodinitrogenase from Azotobacter vinelandii

This study looks at the vanadium nitrogenase apoprotein and how it works with its own cofactors or those of the other versions.

What They Saw
Azotobacter vinelandii strains possessing or lacking genes for one or more of the nitrogenases were grown and their protein was extracted. They also extracted central cofactors for each type separately.

Without nifB, a strain can't produce any of the cofactors, so it's easier to get apoproteins. They took vanadium aponitrogenase (Vnf version) and activated it with FeVco. Not surprisingly, they only saw activity in strains containing vnf when vanadium was present and Mo or ammonium was not. Extracts of active strains lost activity when treated with heat or exposed to air for 45 minutes, though the holoenzyme seemed more stable to heat.

When they purified the enzyme as much as possible, the delta subunit (vnfG-encoded) seemed only loosely attached to the others, unlike in A. chroococcum where it purifies together with the others; though it's not clear that conditions were the same. It was necessary for active enzyme though, and seems to be involved in inserting the cofactor into the enzyme, but also something else.

They tried replacing FeVco with FeMoco in the V nitrogenase (or vice versa in the Mo version). With the V version and FeVco, carbon monoxide inhibited about 70% of the acetylene reduction activity but no hydrogen production activity. The Mo nitrogenase with FeVco had a fraction of the V version's acetylene activity but no nitrogen fixation; sadly they didn't test hydrogen production.

With the V nitrogenase and FeMoco, it had a bit (1/6th) of the acetylene reduction activity, which seemed insensitive to CO. Ethane production was proportionally higher (1:4 instead of 1:12). Hydrogen production was reduced about 40%. Nitrogen fixation was pretty much abolished.

With the correct cofactors, the V nitrogenase had about 31% the acetylene reduction activity, 34% of the hydrogen production activity, and 22% of the nitrogen fixation activity of the Mo nitrogenase, but it's not clear if these in vitro assays allow for accurate comparisons.

It didn't seem like FeFeco allowed any activity in the V aponitrogenase.

What This Means
It seems like nitrogen fixation requires a very specific environment, and messing with it in various ways (mutations, different cofactors) messes it up while allowing the enzymes to still do less strict activities.

Reference:

Chatterjee, R., Allen, R. M., Ludden, P. W. & Shah, V. K. Purification and Characterization of the vnf-encoded Apodinitrogenase from Azotobacter vinelandii. J. Biol. Chem. 271, 6819–6826 (1996).